Table of Contents
Advertisement
Timer and sleep operation (Remote control only) (continued)
12
When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer play-
back.
13
When the timer end time is reached, the system will
enter the power standby mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack,
select "USB" or "AUDIO IN" or "LINE IN" or "OPTICAL
IN" in step 5. This unit will turn on or enter the power
standby mode automatically. However, the connected
unit will not turn on or off.
To stop the timer playback, follow step "Cancelling
the timer setting" of this page.
Checking the timer setting:
1
Turn the power on. Press and hold the TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer Call", and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on. Press and hold the TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer Off", and press the ENTER button. Timer will be
canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on. Press and hold the TIMER button.
2
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
3
Within 10 seconds, press the
"Timer On" , and press the ENTER button.
4
Press the ON/STANDBY button to enter the power
standby mode.
or
button to select
or
button to select
or
button to select
or
button to select
or
button to select
or
button to select
E-18
Sleep operation
The radio, disc, USB, Audio In, Line In,PC In, Optical
In and Bluetooth can all be turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the SLEEP button repeatedly
to select the time.
"Sleep 90"
"Sleep 80" ...
4
"SLEEP" indicator will appear.
5
The unit will enter the power standby mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
1
While "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STANDBY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the
standby mode, proceed as follows.
1
While "SLEEP" is indicated, press the SLEEP button.
2
Within 5 seconds, press the SLEEP button repeatedly
until "Sleep Off" appears.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 10, page 17).
Sleep timer
Timer playback
setting
setting
1-90 minutes
Sleep operation will
automatically stop
"Sleep 10"
"Sleep Off"
End time
Desired time
Timer playback start
time
Advertisement
Table of Contents
