Hitachi FT01 User Manual page 15

Connecting the USB cable (B)
(1) Use a Phillips-head screwdriver to remove the cover of the option port of
the projector. Use the USB cable (B) to connect the Finger Touch Unit (A) to the
projector option port.
USB cable (B)
to the projector. Be sure to always connect to the option port of the projector.
Use caution when connecting because laser emission will start immediately
if the USB cable is connected to the USB TYPE A port while the projector is
connected to the power supply.
medical attention immediately.
(2)
in the User's Manual (Detailed) Operating Guide for the projector.
(3)
(Detailed) Operating Guide for the projector.
FT-01
Projector's Ports
CAUTION
15
Option port