Replacing The Air Purification Filter; Understanding The Healthy Air Protect Lock; Replacing The Filter - Philips AC4558/31 User Manual

6 Replacing the
air purification
filter
Understanding the
healthy air protect lock
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is
in optimal condition when the air
purifier is operating. When the filters
need to be replaced, the filter code
displays on the screen and the filter
replacement alert (
If the filters are not replaced in time,
the air purifier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the filters as soon as possible
according to the filter code.
14 EN
) lights up red.

Replacing the filter

Note
• The air purification filter is not
washable or reusable.
• Always turn off the air purifier
and unplug from the electrical
outlet before replacing the
filters.
• Do not clean the filter with a
vacuum.
• If the pre-filter is damaged, worn
or broken, do not use. Visit
www.philips.com/support or
contact the Consumer Care
Center in your country.
Filter alert chart ( fig. |)
Filter alert light
status
A3 displays
on the screen
and the filter
replacement
alert goes on.
1
Turn off the air purifier and
unplug from the power socket.
2
Take out the used air filter
according to the filter alert light
status displayed on the screen.
Discard used filter (fig. }).
Note
• Do not touch the pleated filter
surface, or smell the filter as it
has collected pollutants from
the air.
Action
Replace the
NanoProtect
filter Pro S3
(FY4152)