Table of Contents
Advertisement
3 Getting started
Installing the filter
Remove all packaging of the filter
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• Make sure that you place the
air purification filter in the
appliance first and then the pre-
filter.
• Make sure that the side with
the tag is pointing towards you
when installing the filter.
1
Pull the top part of the front
cover to remove it from the
appliance (fig. c).
2
Press the two clips down and
pull the pre-filter towards you
(fig. d).
3
Remove the filter (fig. e).
4
Remove all packaging materials
of the air purification filter
(fig. f).
5
Put the unpacked air
purification filter into the
appliance (fig. g).
6
Put the pre-filter back into the
appliance (fig. h).
Note
• Make sure that all hooks of the
pre-filte is properly attached to
the purifier.
6
EN
7
To reattach the front cover,
mount the cover onto the
bottom of the appliance first (1).
Then, gently push the top of the
cover against the body of the
appliance (2) (fig. i).
Wi-Fi connection
Setting up the Wi-Fi connection
for the first time
1
Download and install the Philips
"Clean Home+" app from the
App Store or Google Play.
2
Put the plug of the air purifier in
the power socket and touch
to turn on the air purifier.
» The Wi-Fi indicator
orange for the first time.
3
Make sure that your smartphone
or tablet is successfully
connected to your Wi-Fi
network.
4
Launch the "Clean Home+" app
and click on "Connect a New
Device" or press the "+" button
on the top of the screen. Follow
the onscreen instructions to
connect the air purifier to your
network.
blinks
Advertisement
Chapters
Table of Contents
