Connect The Battery Backup Unit - NEC NE3303-153 User Manual

1-2. Connect the Battery Backup Unit

Each Server has different procedure to install the BBU. Refer to the server's manual to
check the steps.
 Do not apply the pressure on hold the part shown in figure with too much power.
Parts might be damaged.
Notice
 Be attentive to the direction of connectors when you connect BBU(NE3303-153)
to a RAID controller with a Battery Control Cable.
 Align BLACK dot on the connectors of a Battery Control Cable with the
Connector of RAID controller / BBU.
If you reverse connection, parts might be damaged.
＜NE3303-173＞
BLACK dot
＜NE3303-153＞
46
BLACK dot