Viewing Single Camera Page - Panasonic BB-HCM381A Operating Instructions Manual

1.2

Viewing Single Camera page

1.
Access the camera (see page 13).
• The Top page is displayed.
2.
Click the [Single] tab at the top of the page.
• When Security Warning window is displayed, click [Yes] (see page 18).
• See page 19 for Security Warning window when using Microsoft Windows
XP Service Pack 2.
Capture Image
Button
(see page 22)
Operation Bar
(see page 23)
Refresh Interval
(see page 23)
3.
Close the web browser.
Note
• Refresh interval is [Motion] by default. You can change it on the operation
bar (see page 23).
• Refresh interval may change depending on the network condition, PC
performance and what object you view. SD memory recording or IPsec will
also slow refresh interval.
• When displaying video (Motion JPEG), the camera allows up to 30
simultaneous accesses. When trying more than 30 accesses, the 31st
user will see a gray screen. (Maximum 30 accesses for a Buffered Image
page too.)
• To reduce the data traffic, the video can be automatically changed to
refreshing still images on the General User page (see page 81).
• To display the Single Camera page directly, add it to the [Favorites] on the
web browser.
• When you view a dark image, enable the color night view mode on the
Camera Setup page (see page 69). The image will be brighter, but the
refresh interval may slow down and image quality may decrease in a dark
place.
Pan / Tilt
Scan
Zoom
Focus
Preset Program
Alarm1
Please click here when gray color screen is displayed
Alarm2
In case of no audio, please click here.
Brightness
http://panasonic.co.jp/pcc/products/en/netwkcam/technic/sound/index.html
- + Running in IPv4 mode.
STD
Output
Open
Short
Refresh Interval
Motion
Resolution
640 480
X
∗
∗
[For assistance, please call: 1-800-272-7033]
Network Camera
Operating Instructions
Audio Control
Bar (Talk
Button, Listen
Button and
Adjustment
Bar)
(see page 32)
Click to Center
(see page 21)
Camera Image
The banner is
displayed.
(see page 20)
17