Yamaha 01V Owner's Manual page 160

150
Chapter 12—Effects
REV->FLANGE
Reverb and flanger effects in series.
Parameter
REV TIME
INI.DLY
HI.RATIO
DENSITY
FREQ.
NOTE
DEPTH
MOD.DLY
FB.GAIN
WAVE
REV BAL.
HPF
LPF
TEMPO
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see "Setting
REV+SYMPHO.
Reverb and symphonic effects in parallel.
Parameter
REV TIME
INI.DLY
HI.RATIO
DENSITY
FREQ.
NOTE
DEPTH
MOD.DLY
WAVE
REV/SYM
HPF
LPF
TEMPO
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see "Setting
01V—Owner's Manual
Range
0.3–99.9 s
0.0–500.0 ms
0.1–1.0
0–100%
0.05–40.00 Hz
*1
0–100%
0.0–500.0 ms
–99 to +99%
Sine, Tri
0–100%
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
*2
25–300 bps
Delay, Freq, Note & Tempo Parameters" on page 137.
Range
0.3–99.9 s
0.0–500.0 ms
0.1–1.0
0–100%
0.05–40.00 Hz
*1
0–100%
0.0–500.0 ms
Sine, Tri
0–100%
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
*2
25–300 bps
Delay, Freq, Note & Tempo Parameters" on page 137.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine FREQ.
Modulation depth
Modulation delay time
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Modulation waveform
Reverb and flanged reverb balance (0% = flanged
reverb, 100% = reverb)
High-pass filter cutoff frequency
Used in conjunction with NOTE to determine FREQ.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine FREQ.
Modulation depth
Modulation delay time
Modulation waveform
Reverb and symphonic balance (0% = symphonic,
100% = reverb)
High-pass filter cutoff frequency
Used in conjunction with NOTE to determine FREQ.