Makita RP0900K Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Wood Router
  5. RP0900K
  6. Instruction manual

Makita RP0900K Instruction Manual

Hide thumbs Also See for RP0900K:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Router
RP0900
009743
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita RP0900K

Summary of Contents for Makita RP0900K

  • Page 1 INSTRUCTION MANUAL Router RP0900 009743 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model RP0900 Collet chuck capacity 6mm, 1/4", 8 mm and/or 3/8" Plunge capacity 0 - 35 mm No load speed (min 27,000 Overall height 217 mm Net weight 2.7 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. •...

  • Page 3: Router Safety Warnings

    If operating a power tool in a damp location is accessories, or storing power tools. Such unavoidable, use a residual current device preventive safety measures reduce the risk of (RCD) protected supply. Use of an RCD reduces starting the power tool accidentally. the risk of electric shock.

  • Page 4: Functional Description

    Make sure the bit is not contacting the FUNCTIONAL DESCRIPTION workpiece before the switch is turned on. 10. Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or CAUTION: wobbling that could indicate improperly Always be sure that the tool is switched off and •...
  • Page 5 CAUTION: Adjusting the lock lever Since excessive cutting may cause overload of the • 1. Lock lever motor or difficulty in controlling the tool, the depth of 2. Screw cut should not be more than 15 mm at a pass when cutting grooves with an 8 mm diameter bit.

  • Page 6: Operation

    CAUTION: 1. Feed direction Install the bit securely. Always use only the • 2. Bit revolving wrenches provided with the tool. A loose or direction overtightened bit can be dangerous. 3. Workpiece Do not tighten the collet nut without inserting a bit. It 4.
  • Page 7 Secure the templet to the workpiece. Place the tool on Templet guide (Accessory) the templet and move the tool with the templet guide sliding along the side of the templet. 1. Bit 2. Base 3. Templet 4. Workpiece 5. Distance (X) 6.

  • Page 8: Maintenance

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Straight & groove forming bits • Edge forming bits • Laminate trimming bits •...
  • Page 9 Drill point flush trimming bit Chamfering bit 005120 005126 009806 Drill point double flush trimming bit 009809 Cove beading bit 005121 005129 009807 Corner rounding bit 009810 Ball bearing flush trimming bit 005125 005130 009808 1/4" 009811...
  • Page 10 Ball bearing corner rounding bit Ball bearing cove beading bit 005131 005134 1/4" 009815 Ball bearing roman ogee bit 009812 Ball bearing chamfering bit 005135 005132 1/4" 009816 009813 Ball bearing beading bit 005133 009814...
  • Page 12 Makita Corporation 884875A3...

This manual is also suitable for:

Rp0900

Table of Contents