Configuring The Network Settings; Checking The Network Information Of The Unit; Setting The Network Connection Method (Wired/Wireless); Setting The Network Parameters Automatically (Dhcp) - Yamaha YHT-5950U Owner's Manual

Configuring the network settings

Checking the network information of the unit

Displays the network information of the unit.
Setup menu
"Network" > "Information"
Status The connection status of the NETWORK jack
Connection Connection method
SSID The access point to which the unit is connected
MusicCast Network Readiness or not for the MusicCast Network
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
Setting the network connection method (Wired/
Wireless)
Selects the network connection method.
Setup menu
"Network" > "Network Connection"
Choices
Select this option when you want to connect the unit to a network with
Wired
a commercially-available network cable.
Select this option when you want to connect the unit to a network via
Wireless(Wi-Fi)
the wireless router (access point).
NOTE
For details on the network connection, see the following:
▪ "Preparing for connecting to a network" (p.29)
Setting the network parameters automatically
(DHCP)
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
automatically using a DHCP server.
Setup menu
"Network" > "IP Address" > "DHCP"
Settings
Off Does not use a DHCP server. Configure the network parameters manually.
Uses a DHCP server to automatically obtain the unit's network parameters
On
(such as IP address).
110
En