Setting The Phase Of The Subwoofer; Setting The Use Of Extra Bass; Setting The Use Of Virtual Cinema Front; Setting The Distance Between Each Speaker And The Listening Position - Yamaha YHT-5950U Owner's Manual

Hide thumbs Also See for YHT-5950U:
Table of Contents

Advertisement

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch
the subwoofer phase.
Setup menu
"Speaker" > "Configuration" > "Subwoofer Phase"
Settings
Normal
Does not reverse the subwoofer phase.
Reverse
Reverses the subwoofer phase.
NOTE
This setting is not available when "Subwoofer" is set to "None". For details on "Subwoofer" in the "Setup"
menu, see the following:
▪ "Setting the use of a subwoofer" (p.93)

Setting the use of Extra Bass

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced
bass sounds, regardless of the size of the front speakers and the presence or
absence of the subwoofer.
Setup menu
"Speaker" > "Configuration" > "Extra Bass"
Settings
Off
Disables Extra Bass.
On
Enables Extra Bass.
NOTE
You can also use BASS on the remote control to enable/disable Extra Bass.

Setting the use of Virtual CINEMA FRONT

Selects whether to use Virtual CINEMA FRONT.
NOTE
Select "On" only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:
▪ "Using Virtual CINEMA FRONT" (p.22)
Setup menu
"Speaker" > "Configuration" > "Virtual CINEMA FRONT"
Settings
Off
Disables Virtual CINEMA FRONT
On
Enables Virtual CINEMA FRONT
NOTE
This setting is not available when "Surround" is set to "None". For details on "Surround" in the "Setup" menu,
see the following:
▪ "Setting the use of surround speakers and their size" (p.95)
Setting the distance between each speaker and the
listening position
Sets the distance between each speaker and the listening position so that sounds from
the speakers reach the listening position at the same time.
Setup menu
"Speaker" > "Distance"
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
NOTE
Select the unit of distance from "Meter" or "Feet" in "Unit".
96
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-d485Rx-v485

Table of Contents