Other functions
14
Copying attenuator settings to all channels
Here's how attenuator settings can be copied from
one channel to all channels (except the stereo output
channel).
1
Use the [SEL] keys to select the copy source
channel, and press the [EQ] key
(EQ/ATT) key.
The EQ/ATT/GRP screen/EQ/ATT page will
appear.
2
Move the cursor to the ATT. area.
3
Press the [SHIFT] key + [F5] (COPY ATT. TO
ALL) key.
A popup window will ask you to confirm the
copy operation.
4
Move the cursor to the OK button and
press the [ENTER] key.
The copy will be executed, and the same attenu-
ator setting will be copied to all channels except
the stereo output channel.
If you copy to paired channels, the same attenuator
settings will be copied to both channels.
224
[F1]
Operation section