Yamaha AW2816 Owner's Manual page 285

PATCH screen
Patch signals to a channel/track
Function
Assign signals to the inputs of input
channels 1–8, return channels 1/2, and
recorder tracks 1–16.
Key operation
• [PATCH] key [F1] (Patch IN) key
• Repeatedly press the [PATCH] key
until the display shown at right
appears.
Screen functions
A
MIXER CHANNEL INPUT ASSIGN
Select the signal that will be assigned to input
channels 1–8 and return channels 1/2. The follow-
ing signals can be assigned.
• Input channels 1–8
Display
AD 1 – AD 8 INPUT jacks 1–8
SL 1 – SL 8 INPUT 1–8 of an I/O card
L/R channels of the DIGITAL
DIN L/DIN R
STEREO IN jack
MET Internal metronome
• Return channels 1/2
Display
*1
EFF1 L/R Return of internal effect 1
*2
EFF2 L/R Return of internal effect 2
AD 1/2 – AD 7/8 INPUT jacks 1/2–7/8
SL 1/2 – SL 7/8 INPUT 1/2–7/8 of an I/O card
DIGITAL STEREO IN jack (ste-
DIN L/R
reo)
*1 Only Return Channel 1 (RTN 1) can be selected
*2 Only Return Channel 2 (RTN 2) can be selected
Patch IN page
1
2
3
B
C
Signal type
Signal type
Reference section
EFFECT PATCH
Select whether internal effects 1/2 will be used via
AUX buses 5/6 (AUX 5/AUX 6) or inserted into the
specified channel (INSERT). For details on opera-
tion, refer to page 88.
RECORDER TRACK INPUT ASSIGN
Here you can select the signals to be assigned to
the inputs of tracks 1–16. The following signals
can be assigned.
• Recorder inputs 1–16
Display
BUS 1 – BUS 8 Bus 1–8
DIR 1 – DIR 8 Input channel direct out 1–8
Tip!
For details on operations in the Patch IN page, refer to
page 71.
Signal type
283