Get Started; Charge The Battery - Philips TAA5205 User Manual

3 Get started

Charge the battery

Note
 Before you use your earpieces for the rst
time, place the earpieces in the charging box
and charge the battery for 3 hours for
optimum battery capacity and lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging the earpieces,
as connecting the earpieces for charging will
power the earpieces o .
Charging Box
Connect one end of the USB cable into
the charging box, and another end into
the power source.
The charging box starts charging.
• Charging process is veri ed by the
white LED light on the front panel.
• When the charging box is fully
charged, the blue light goes on.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces. When the
charging box is fully charged, it supports 3
times full recharge cycle for the earpieces.
Earpieces
Place the earpieces in the charging box.
The earpieces start charging.
• Charging process is veri ed by white
LED light on the earpieces.
• When the earpieces is fully charged,
the white light goes o .
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging box) by USB cable.