D-Link AirPlus Xtreme G DWL-G520 Manual page 10

Getting Started (continued)
Setting up a Wireless Infrastructure Network
For a typical wireless
setup at home (as shown
above), please do the
following:
7 7 7 7 7
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router.
(See the Quick Installation Guide included with your router).
Install the D-Link AirPlus Xtreme G DWL-G520 Wireless PCI Adapter into an
available PCI slot on your desktop computer.
(See the Quick Installation Guide included with the network adapter).
Install a D-Link DWL-G650 Wireless Cardbus Adapter into a laptop computer.
(See the Quick Installation Guide included with the DWL-G650).
If you wish, you may connect a computer that is equipped with an Ethernet net-
work adapter (such as a DFE-530TX+) to the router also.
A RADIUS server is optional. Connect a RADIUS server to your network to use all
the features of WPA. (Without a RADIUS server you can still use the WPA Pre-
Shared Key mode.) RADIUS Authentication can also be provided by another ser-
vice provider over the Internet and remote to your network site.
2 2 2 2 2
6 6 6 6 6
3 3 3 3 3
TM
10
1 1 1 1 1
4 4 4 4 4
5 5 5 5 5