Table of Contents
Advertisement
Section 1 - Product Overview
Main Sensor Unit
1
1
Battery Compartment Cover
2
Status LED
3
Reset / Bypass button
4
Alignment notch
D-Link DCH-B112A1 User Manual
Hardware Overview
Front
Back
Slide up to reveal the battery compartment when replacing the battery.
Blinking red every 1 second Waiting for pairing.
Rapidly blinking red every
0.2 second
Blinking green every 1
second 3 times
Solid green for 10 seconds
Off
Press this button to bypass the sensor triggering anything. Press and hold the Reset/Bypass button
until the LED blinks red in order to reset the sensor to factory default settings.
Use these notches to align both the Main Sensor Unit and the Magnetic Trigger during mounting.
Magnetic Trigger
2
3
4
Sucessfully reset.
Sensor triggered.
Successfully paired to the hub.
Power saving mode. On standby, waiting to be triggered.
4
3
Advertisement
Table of Contents
