Section 1 - Product Overview
1
1
Power Socket
2
Status LED
3
Power / Reset Button
D-Link DSP-W118 User Manual
Hardware Overview
Front
Connect your appliances, lamps, or other electronic devices you wish to control here.
Solid Red
Booting up after being plugged in or factory reset.
Blinking Red
Can't connect to Wi-Fi.
Blinking Amber
Ready for setup.
Successfully connected to the Internet, bound to a mydlink account, and the
Solid Green
socket is switched on.
Blinking Green &
Firmware is currently being upgraded.
Red
Switched off, no power is being supplied from the socket it's plugged into, or
Off
the device is unplugged.
Press this button to turn on/off the power socket. Press and hold this button until the Status LED
turns solid red to reset the device to factory default settings.
Top
2
3
3