Table of Contents
Advertisement
16
•
Wall Mount (A x B)
NOTE
•
Use the screws specified by VESA standards.
•
The wall mount kit includes the installation guide
and all necessary parts.
•
The wall mounting bracket is optional.
•
The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper length.
•
For more information, please refer to the user
manual for the wall mounting bracket.
CAUTION
•
Unplug the power cord before moving or installing
the Device to avoid electric shock.
•
Installing the Device on the ceiling or on a slanted
wall may result in the Device falling off, which could
lead to injury.
•
Applying excessive force when tightening screws
may cause damage to the Device. Damage caused
in this way will not be covered by the product
warranty.
•
Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by the
use or misuse of inappropriate components will not
be covered by the product warranty.
•
To prevent injury, this apparatus must be securely
attached to the wall in accordance with the
installation instructions. (This pertains only to
Australia and New Zealand.)
•
When measured from the back of the Device, the
length of each installed screw must be 8 mm or less.
Wall Mount Plate
Wall Mount Plate
Back of the Device
Screw Dimensions
: M4 x L10
Maximum 8 mm
Back of the
Device
Advertisement
Table of Contents
