Table of Contents
Advertisement
■ Receiving
A calling ID or text message will appear when a Status call
is received. Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as [Stack], or press and hold
the key programmed as [Selcall], [Status], or [Selcall +
Status] to enter Stack mode.
•
The last received message is displayed.
2 Press
•
Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
•
Press and hold
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press
•
To delete the selected message, press
the deletion, press
•
To delete all messages, press and hold
1 second. To confi rm the deletion, press
SHORT/LONG MESSAGES
Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask your
dealer for details.
GPS REPORT
GPS data can be manually transmitted by pressing the key
programmed as [Send the GPS data], or by accessing the
Menu {page 13}. If set up by your dealer, GPS data may be
automatically transmitted at a preset time interval.
•
When using the GPS function, you must fi rst connect the VHF/
GPS antenna or UHF/ GPS antenna.
20
/
to select the desired message.
for 1 second or press
to return to normal operation.
or
.
to cycle the
or #. To confi rm
or # for
or
.
Advertisement
Table of Contents
