Table of Contents
Advertisement
STATUS MESSAGE
You can send and receive Status messages which may be
decided in your talk group. Messages can contain up to 16
alphanumeric characters.
A maximum of 15 received messages can be stored in the
stack memory of your transceiver.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Status] to enter Status
mode (proceed to step 5) or [Selcall + Status] to enter
Selcall mode (proceed to step 3).
3 Press
•
You can enter a station ID by using the DTMF keypad, or
by using
4 Press
5 Press
•
You can enter a status ID by using the DTMF keypad, or by
using
6 Press the key programmed as Call 1 to Call 6 to initiate
the call.
■ Receiving
A calling ID or text message will appear when a Status call
is received. Press any key to return to normal operation.
22
/
to select the station you want to call.
/
.
to enter Status mode.
/
to select the status you want to transmit.
/
(refer to step 3, above).
Advertisement
Table of Contents
