Philips 65PFL6601 User Manual page 31

65PFL6601 serial numbers beginning with DS4A1702 or lower numbers / 75PFL6601 serial numbers beginning with GZ1
Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus Ultra HD and Advanced settings sub menus.
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
To select the desired setting, then press OK
Dynamic
(Off, Minimum, Medium and Maximum)
contrast
Off
Color
enhancement
On
Black To select the desired setting, then press OK
stretch (Off, Minimum, Medium and Maximum)
Perfect To select the desired setting, then press OK
Motion Rate (Off, Minimum, Medium and Maximum)
4K UHD To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Upscaling
To select the desired setting, then press OK
Macro
(Off, Minimum, Medium and Maximum)
Dimming
Noise To select the desired setting, then press OK
reduction (Off, Minimum, Medium and Maximum)
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
Mode
Red gain
Green gain
Color
alignment
Blue gain
Red offset
Green offset
Blue offset
Dynamic contrast Off
Color enhancement Minimum
Black stretch Medium
Perfect Motion Rate Maximum
4K UHD Upscaling
Macro Dimming
Noise reduction
MPEG artifact reduction
To set color enhancement to off
To make colors more vivid and bright
Mode
Color alignment
Custom color management Red gain
HDR mode Green gain
Blue gain
Light sensor
Red offset
Gamma
Green offset
Blue stretch
Blue offset
Film mode
To set the color temperature to Personal,
Cool, Normal and Warm.
When you adjust the following settings,
Personal will be set automatically.
Cursor Cursor
To decrease red To increase red
contrast contrast
To decrease green To increase green
contrast contrast
To decrease blue To increase blue
contrast contrast
To decrease red To increase red
brightness brightness
To decrease green To increase green
brightness brightness
To decrease blue To increase blue
brightness brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
To rotate only
Tint selected color tint in
Custom color
clockwise direction
management
To decrease color
with only selected
Saturation
color
To decrease
Brightness brightness with only
selected color
Off To set HDR mode to off
Automatically switches to a dedicated
HDR mode
picture quality setting when receiving HDR
Auto
signal
To set light sensor to off
Off
To adjust backlight for the best picture
Light sensor
quality by dynamically adjusting the
* On
backlight intensity in accordance with
lighting condition in the room
To select the desired setting, then press OK
Gamma (Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
To select the desired setting, then press OK
Blue stretch
(Off, Minimum, Medium and Maximum)
To set film mode to off
Off
Film mode
To optimize the picture recorded by the
Auto
original film
* Adjusts backlight for the best picture quality by dynamically adjusting
the backlight intensity in accordance with the room lighting condition
when the Light sensor feature is set to On. Please ensure the room
lighting is stable and the light sensor is not blocked.
Light sensor is not available for 75PFL6601 and 65PFL6601/F7 A.
Note(s)
•
Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2, HDMI 3 or HDMI 4.
–The connected HDMI device is outputting a video signal.
31
Cursor Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.
.
English