Philips 65PFL6601 User Manual page 90

65PFL6601 serial numbers beginning with DS4A1703 or higher numbers / 75PFL6601 serial numbers beginning with GZ2
Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus Ultra HD and Advanced settings sub menus.
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
To select the desired setting, then press OK
Dynamic
(Off, Minimum, Medium and Maximum)
contrast
Off
Color
enhancement
On
Black To select the desired setting, then press OK
stretch (Off, Minimum, Medium and Maximum)
Perfect To select the desired setting, then press OK
Motion Rate (Off, Minimum, Medium and Maximum)
4K UHD To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Upscaling
To select the desired setting, then press OK
Macro
(Off, Minimum, Medium and Maximum)
Dimming
Noise To select the desired setting, then press OK
reduction (Off, Minimum, Medium and Maximum)
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Dynamic contrast Off
Color enhancement Minimum
Black stretch Medium
Perfect Motion Rate Maximum
4K UHD Upscaling
Macro Dimming
Noise reduction
MPEG artifact reduction
To set color enhancement to off
To make colors more vivid and bright
Auto picture
Color alignment
Backlight Custom color management
Contrast HDR mode
Brightness
Gamma
Color
Blue stretch
Tint
Film mode
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Auto adjustment
Clock
To set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
To decrease red
Red gain
contrast
To decrease green
Green gain
Color
contrast
alignment
To decrease blue
Blue gain
contrast
To decrease red
Red offset
brightness
To decrease green
Green offset
brightness
To decrease blue
Blue offset
brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
To rotate only
Tint selected color tint in
Custom color
clockwise direction
management
To decrease color
Saturation with only selected
color
To decrease
Brightness brightness with only
selected color
To set HDR mode to off
Off
Automatically switches to a dedicated
HDR mode
picture quality setting when receiving HDR
Auto
signal
To select the desired setting, then press OK
Gamma (Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
To select the desired setting, then press OK
Blue stretch
(Off, Minimum, Medium and Maximum)
Off To set film mode to off
Film mode
To optimize the picture recorded by the
Auto
original film
Note(s)
•
Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2, HDMI 3 or HDMI 4.
–The connected HDMI device is outputting a video signal.
31
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor Cursor
To increase red
contrast
To increase green
contrast
To increase blue
contrast
To increase red
brightness
To increase green
brightness
To increase blue
brightness
Cursor Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.
.
English