Contents 6 Product specifications 1 Important Safety Care for your product 7 Troubleshooting Care of the environment Help and support 2 Your product Main unit Remote control Connectors Wireless speakers Wireless subwoofer 3 Connect and set up Connect the main unit Charge speakers Pair up with speakers/subwoofer Place speakers...
1 Important When you disconnect the power cord, • always pull the plug, never the cable. Risk of short circuit or fire! For identification and supply ratings, Read and understand all instructions • see the type plate at the back or before you use your product. If damage is bottom of the product.
For extensive online support, visit www. If the battery compartment cannot be • philips.com/support to: completely secured, discontinue use download the user manual and the • of the product. Keep out of reach of quick start guide children and contact the manufacturer.
• audio from the selected HDMI Congratulations on your purchase, and ARC source is detected, or when welcome to Philips! To fully benefit from an unsupported audio format is the support that Philips offers, register your detected. product at www.philips.com/welcome.
USB: Switch to USB mode. Remote control Bluetooth: Switch to Bluetooth mode; Press and hold three seconds This section includes an overview of the to break the current Bluetooth remote control. connection. HDMI ARC: Switch your source to HDMI ARC connection. Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth...
TO TV - HDMI OUT (ARC) Connectors Connect to the HDMI (ARC) input on the TV. This section includes an overview of the connectors available on this product. Wireless speakers This product comes with a pair of wireless surround speakers. d e f g h TO R SPEAKER Connect to the right base speaker.
Orange LED During wireless pairing between • Lights up when the surround the subwoofer and the main unit, • speaker is being charged (only for the indicator blinks white quickly. the wireless speaker docked onto When the pairing succeeds, the •...
3 Connect and set Blink red: near empty, less than 10% • remaining This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide.
If the pairing fails, repeat the steps Pair up with the speakers above. Turn on the main unit and the surround wireless speakers. Note » If the connection to the main unit After the subwoofer is manually • is lost, the red and orange LEDs connected to the main unit, pair the on the wireless speaker blink surround speakers with the main unit...
Follow these general guidelines for Connect to TV through HDMI (ARC) speakers placement. Best quality audio Seating position: This product supports HDMI with Audio This is the center of your listening area. Return Channel (ARC). If your TV is HDMI Place the main unit (left and right ARC compliant, you can hear the TV audio base speakers) in front of the seating...
Option 2: Connect audio through a Connect audio from TV and digital coaxial cable other devices Best quality audio Play audio from TV or other devices through the speakers of this product. Use the best quality connection available on this product, TV, and other devices. Note When this product and TV are •...
4 Use your Press VOICE to create sound effect • which makes human voice more clear product and outstanding for listening. Equalizer This section helps you use this product to Change the high frequency (treble) and play audio from connected devices. low frequency (bass) settings of this product.
» The blue LED on the right base connection. speaker blinks. On the Bluetooth device, switch on Bluetooth, search for and select Philips CSS5235Y to start connection (see Play music via NFC the user manual of the Bluetooth device on how to enable Bluetooth).
Enable NFC on the Bluetooth device USB storage devices (see the device' s user manual for details). Enjoy audio on a USB storage device, such Tap the NFC device on the NFC tag as an MP3 player and USB flash memory, of this product until you hear a beep etc.
Update software via USB Apply factory settings Check the latest software version on You can reset this product to the default www.philips.com/support. settings programmed at the factory. Search for your model and click on • In AUX mode, on the remote control "Software and drivers".
Page 18
Unzip the download if zipped, and Caution make sure that the unzipped file Do not turn off the power or remove contains the following two files. • the USB storage device when the "CSS5235.bin" (for the software of software update is in progress because the main unit) you might damage this player. "MCU5235.bin"...
6 Product Main unit (left and right base speakers) specifications • Power supply: Model (Philips branded AC power • adapter): Note DYS602-210309W; AS650-210- Specifications and design are subject to AA309 • change without notice. Input: 100-240 V~, 50/60 Hz 1.5 A •...
Bluetooth device, or enable Bluetooth request service. If you still have a problem, connection via the NFC tag (if get support at www.philips.com/support. available). Main unit The buttons on this product do not work.
Page 21
Dock the wireless surround speakers remove any obstacle between the • into the main unit to charge the device and this product. battery. Turn off Wi-Fi function on the • Bluetooth device to avoid interference. No sound from the wireless subwoofer. For some Bluetooth, the Bluetooth •...
Page 23
产品中有害物质的名称及含量 Names and Contents of Hazardous Substances 有害物质 Hazardous Substance 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 Name of the parts (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Housing 外壳 Subwoofer 超重低音箱 Loudspeakers 喇叭单元 PWBs 电路板组件 Accessories (Remote control & cables) 附件(遥控器,...
Page 24
Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.