Place Speakers - Philips CSS5235Y/93 User Manual

Pair up with the speakers
1
Turn on the main unit and the
surround wireless speakers.
» If the connection to the main unit
is lost, the red and orange LEDs
on the wireless speaker blink
alternatively.
2
Dock the left and right wireless
speakers onto the main unit (the left
and right base speakers) to pair up
automatically.
» If the pairing is successful, the
orange LED on the wireless
speaker lights up for five seconds.
» If the pairing fails, the red and
orange LEDs on the wireless
speaker blinks alternatively.
3
If the paring fails, re-dock the wireless
speakers onto the main unit.
Pair up with the subwoofer
1
Turn on the main unit, and the
subwoofer.
» If the connection to the main
unit is lost, the white LED on the
subwoofer blinks slowly.
2
Press the CONNECT (connect)
button on the subwoofer to enter the
pairing mode.
» The white LED on the subwoofer
blinks quickly.
3
In OPTICAL mode (press OPTICAL)
, within six seconds, on the remote
control, press
once, and then hold down BASS +.
» If the pairing succeeds, the white
LED on the subwoofer lights up.
» If the pairing fails, the white LED
on the subwoofer blinks slowly.
twice then Volume +
4
If the pairing fails, repeat the steps
above.
Note
After the subwoofer is manually
•
connected to the main unit, pair the
surround speakers with the main unit
again for re-connection.

Place speakers

For best sound effect, position all the
speakers towards the seating position and
place them close to your ear level (seated).
SUB
WOOFER
L
Note
Surround sound depends on factors
•
such as room shape and size, type of
wall and ceiling, windows and reflective
surfaces, and speaker acoustics.
Experiment with the speaker positions
to find the optimum setting for you.
R
EN
9