Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1
Turn on the set-top box or the connected device.
Press
SOURCE and use
connected device and wait a few seconds till the picture appears.
Watch TV
HDMI1
Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
1
Press .
Guide to Home menu
Source
Home
Watch TV
Network
: Switches back to the TV source if another source
Watch TV
is selected.
: To select connected devices.
Source
Home Network : Accesses Home network menus.
: Accesses Net TV menus.
Net TV
: Accesses Miracast menus.
Miracast
Setup
: Accesses menus that allow you to change picture,
sound and other TV settings.
to select the set-top box or the
HDMI2
HDMI3
Video
Net TV
Miracast
Setup
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1
Press
SOURCE on the remote control.
2
Use
to select a device to lock or unlock.
3
Press
OPTIONS on the remote control.
4
Use
to select Lock or Unlock, then press OK.
•
If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
5
Enter your PIN. Change PIN
Changing device type
You can change device icons displayed in the source list.
1
Press
SOURCE on the remote control.
2
Use
to select the desired device.
3
Press red button on the remote control.
4
Use
to select the desired type, then press OK.
To reset the type
•
Press
OPTIONS on the remote control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in Master EasyLink.
1
Press
SOURCE on the remote control.
2
Use
to move the cursor to any device.
3
Press
OPTIONS on the remote control.
4
Use
to select Scan connections, then press OK.
22
p. 39
p. 36
Continued on next page.
.
English