Table of Contents
Advertisement
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive a Dolby Digital signal, you need to
connect a TV or other component to the unit with an
optical or coaxial digital cord (page 19) and set the
digital output mode of the TV or other component to
Dolby Digital.
Press AUDIO repeatedly until the desired
signal appears in the front panel display.
• "MAIN": Sound of the main language will be
output.
• "SUB": Sound of the sub language will be
output.
• "MAIN+SUB": Mixed sound of both the main
and sub languages will be output.
84
GB
Changing the Input Level
of the Sound from
Connected Components
Distortion may occur when you listen to a
component connected to the TV/VIDEO jacks
on the rear panel, or to the AUDIO IN jack on
the front panel. Distortion is not a malfunction
and will depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
1
Press FUNCTION repeatedly until "TV/
VIDEO" or "AUDIO" appears in the
front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
4
Press X/x to select a setting.
• "ATT ON": You can attenuate the input
level. The output level is changed.
• "ATT OFF": Normal input level.
5
Press
.
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
or c.
Advertisement
Table of Contents
