Bosch Benchmark SHX88P Series Operating Instructions Manual page 16

en-us Home Connect
Automatic: Connect to the home
network using the WPS function of
your router.
Manual: Connect your mobile device
to the Home Connect network. The
network settings are then manually
entered using the Home Connect
App to connect to your home
network.
Following successful connection, the
following text is indicated on the
display window at the top @.
Observe the supplied Home Connect
documents with regard to this.
Connect to App
The "Connect to App" menu option is
not available unless there was a
connection to the home network.
The "Connect to App" setting
establishes the link between the
dishwasher, App and your user
account.
Following successful connection, the
following text is indicated on the
display window at the top @.
Observe the supplied Home Connect
documents with regard to this.
16
About data protection:
When your Home Connect
dishwasher is connected for the first
time to a WLAN network which is
connected to the Internet, your Home
Connect dishwasher transmits the
following categories of data to the
Home Connect server (initial
registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure
a secure IT connection).
The current software and
■
hardware version of your
dishwasher.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connect functions for use and
is activated the first time you use
these Home Connect functions.
Please note that the Home Connect
functions can be used only in
conjunction with the Home Connect
App. Information on data protection
can be accessed in the Home
Connect App.
Remote start button
Once the dishwasher is connected to
the home network, press the remote
start button h to control the
dishwasher from your device.
If the dishwasher has still not logged
into Home Connect, access the
Home Connect settings by pressing
the remote start button h.
Follow the directions in Home
Connect app.