Bosch Benchmark SHX88P Series Operating Instructions Manual page 44

en-us Operating the Dishwasher
Cancel a cycle (reset)
Open the door and press and
1.
hold the Start button )* for
approximately 3 seconds until the
digital display @ shows:
"Program was terminated".
Close the door.
2.
Wait about 1 minute while the
3.
dishwasher drains.
Open the door and press the
4.
On/Off switch (.
Changing the wash cycle
When the Start button ( has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
44