Brother MFC-J5945DW Quick Setup Manual

MFC-J5945DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
*Inbox ink cartridges contain the
following yield of replacement
LC3237 cartridges:
Watch our FAQ videos for help
- Black: approx. 75% yield
with setting up your Brother
- Others: approx. 65% yield
machine.
uu Reference Guide: Supply
support.brother.com/videos
2 Load plain A4 paper
For more information about paper handling and sizes, see the Reference Guide.
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Connect the power
3
cord
(Example for UK)
NOTE
You can adjust the control panel angle to read the
touchscreen more easily.
6
Set the date and time
Follow the touchscreen instructions to set the date and time.
Connect the telephone line cord
9
If you are not using your machine as a fax, go to
For more information on using the fax feature, see the Online User's Guide.
Lift the scanner cover.
Quick Setup Guide
Product Safety Guide
Brother Installation Disc
Specifications
Fan the paper well.
Select your country
4
or language
(Initial setup only)
After turning the machine on, you may need to set your country
or language (depending on your machine).
If required, follow the touchscreen instructions.
7
Machine settings
Follow the touchscreen instructions to configure the
machine's settings:
• View operation tips
• Set Brother LCD Message defaults
• Check print quality
• Configure the tray or paper size settings
• Print the installation sheet
10 .
(Example for UK)
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Power Cord
Maintenance Sheet
Do not exceed this
mark (bbb).
Adjust the paper guides.
Load the paper in the tray.
5
Install the inbox ink cartridges
Open the ink cartridge cover.
Close the scanner cover.
NOTE
• The Reference Guide for this model is available on the enclosed
installation disc.
• Save all packing materials and the box in case you must ship your
machine.
• You must purchase the correct interface cable for the
interface you want to use.
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 5 metres
long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
Secure Network Access
Your machine's default password is on the label on
the back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
Put on the tray top cover,
Pull out the paper support
and then slowly push the
until it locks into place.
paper tray completely into
the machine.
Quickly shake just the
black ink cartridge
horizontally 15 times as
shown, before inserting it
into the machine.
Select your language
8
(if needed and only for
certain models)
1.
Press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press .
D012KE001-01
UK
Version A
Follow the touchscreen
instructions to unpack and
install the ink cartridges.
Close the ink cartridge cover.
The machine will prepare the
ink tube system for printing.
NOTE
The first time you install a set
of ink cartridges the machine
will use an amount of ink to fill
the ink delivery tubes for high
quality printouts. This process
will only happen once.