Table of Contents
Advertisement
34
Installation
2. Select a recording mode.
3
•
Gray (No recording): No schedule recording.
•
Gold (Continuous recording): Recording starts automatically
from the preset time.
•
Red (Sensor event recording): Recording starts automatically
when the sensor occurs within a designated time.
•
Green (Motion event recording): Recording starts
automatically when motion is detected within a designated
time.
•
Yellow (Sensor+Motion recording): Recording starts
automatically when the sensor signal has input or motion
has been detected.
•
Gold+Red (Continuous+Sensor event recording): Recording
starts automatically from the preset time. When the sensor
occurs within a designated time, changes the continuous
recording mode to sensor event recording mode and
recording starts automatically.
•
Gold+Green (Continuous+Motion event recording):
Recording starts automatically from the preset time. When
the motion is detected within a designated time, changes
the continuous recording mode to motion event recording
mode and recording starts automatically.
•
Gold+Yellow (Continuous+Sensor+Motion event
recording): Recording starts automatically from the preset
time. When the sensor signal has been input or motion has
been detected, changes the continuous recording mode
to motion event recording mode and recording starts
automatically.
NOTE
In case you set the motion recording setting on the channel of IP
camera, the recording starts when Video content analysis event as
well as Motion event is occurred.
3. Drag and drop with left button of the mouse to set the channel
and time you want to record. The color of the time block is
changed depending on the selected mode.
4. Press BACK to move to the previous menu.
If the save message appears, select [OK] and press OK to save
the settings.
5. Press BACK repeatedly to exit the Setup menu.
Advertisement
Table of Contents
