2.5.1
Installing an expansion card to riser card bracket 1
The pre-installed riser card bracket 1 on the PCIE1 slot supports Full-Height (FH) and Half-
Length (HL) PCIE x16 expansion cards.
To install an expansion card to the riser card bracket 1:
1.
Remove the screw that secures the
riser card bracket 1 to the chassis.
2.
Firmly hold the riser card bracket 1, then pull it up to detach it from the PCIE1 slot on
the motherboard.
2-14
Riser card bracket 1
Chapter 2: Hardware Information