2.6
Cable connections
•
The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you are going to remove pre-installed components to
install additional devices.
•
Refer to Chapter 4 for detailed information on the connectors.
Pre-connected system cables
1.
8-pin BPPWR1 power connector (from power supply to backplane)
2.
8-pin BPPWR2 power connector (from power supply to backplane)
3.
Auxiliary panel 1 connector (from motherboard to front I/O board)
4.
System fan connectors (from motherboard FAN1, 3, 5, 7 to system fans)
5.
Panel connector (from motherboard to front I/O board)
ASUS RS720A-E9-RS24-E
2-31