Fujitsu FI-4530C Operator's Manual page 89

Symptom 3
Are the documents loaded correctly
on the ADF paper chute?
Is the ADF closed completely?
Is the interface cable connected
correctly?
(when using the scanner on SCSI
interface)
Is the SCSI ID set correctly?
Does the Function No. display
indicate any alarm?
84
The scanning does not start.
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
Load the documents correctly
on the ADF paper chute.
Close the ADF completely.
Connect the interface cable
correctly.
Set the SCSI ID correctly by
the SCSI ID switch on the
rear side of scanner.
The scanner operation is
normal.
Continued on the next page