Connection To An Audio System - Sharp DV-NC200S Operation Manual

Connection to an Audio System

Playing 2 channel audio
Connecting the VCR/DVD to audio equipment provides normal ste-
reo sound, plus powerful stereo sound enhanced by Dolby Digital 5.1
channel surround sound, DTS and MPEG audio.
AUDIO
Stereo system
VCR/DVD
ANALOG
AUDIO OUT
Setting
Connection
Connecting to Stereo
System.
* To complete these settings, refer to pages 29, 31.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• ANALOG AUDIO OUT jacks are not available on the DTS audio.
Downloaded from: http://www.usersmanualguide.com/
L R
Analogue audio
input jacks
Audio cable
(commercially
available)
SETUP > (QUICK) >
DOLBY DIGITAL DTS
DPCM OFF
Playing Dolby Digital (5.1 channel audio),
Connecting an amplifier with a Dolby Digital/ DTS/ MPEG audio digi-
tal surround processor to your VCR/DVD's audio digital jack provides
richer and more powerful audio play. This connection is not possible
if the processor or amplifier to which you want to connect does not
have an audio digital input jack.
DTS decoder, MPEG decoder,
Connection
MPEG
Connecting to a Dolby
DPCM
Digital, DTS decoder
or MPEG decoder for
Dolby Digital, DTS or
MPEG audio output.
Connecting to the
other equipment (an
MD deck or DAT deck
etc.) without Dolby
Digital decoder.
* To complete these settings, refer to pages 29, 31.
C Digital Connection to Audio Equipment or MD deck without a Dolby Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as
an MD deck or DAT deck, play the disc as you would normally with
the connection shown above. Audio CDs recorded in the DTS for-
mat cannot be transferred digitally or via analogue.
• Some Audio CDs have a short silent section between musical tracks.
When sound from discs such as these is digitally recorded by con-
necting the VCR/DVD directly to a digital recorder (such as an MD
deck or DAT deck), the music may be recorded continuously and
track numbers may be lost.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound, DTS or
MPEG Audio cannot be connected digitally to external recording
equipment such as an MD deck or DAT deck.
It may be possible to record "Dolby Digital" or "MPEG" Audio via a
digital connection if the VCR/DVD output is set to "DPCM" (see page
31 "AUDIO Setting"). Analogue recording is possible but not for
DTS recorded audio.
Hint
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only use-
ful in DVD mode.
• The audio source on a disc in a Dolby Digital 5.1 channel sur-
round format cannot be recorded as digital sound by an MD or
DAT deck.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• By hooking this VCR/DVD up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1 channel sur-
round sound as heard in the movie theatres.
• By hooking this VCR/DVD up to the DTS decoder, you can enjoy
5.1 channel surround system which reproduces the original
sound as truthfully as possible. 5.1 channel surround system is
developed by the Digital Theater System Inc.
– 11 –
DTS or MPEG audio
Dolby Digital decoder,
MD deck or DAT deck
DIGITAL
AUDIO OUT
SETUP >
Setting
DOLBY DIGITAL
BITSTREAM
DPCM
COAXIAL
Audio digital
input jack
Audio coaxial
digital cable
(commercially
available)
(QUICK) >
DTS MPEG
OFF DPCM
EN