Connect To The Internet - Philips 39PFL3108K/12 User Manual

Option 3: Connect audio through a digital
optical cable
Note
•
The digital optical cable or connector might be
labeled as SPDIF OUT or OPTICAL OUT .
(Cable not supplied)

Connect to the Internet

Connect the home theater to the internet and
enjoy:
• BD-Live: You can access BD-Live
features (see 'Access BD-Live on Blu-
ray' on page 13 ).
•
Net TV : browse Net TV services (see
'Browse Net TV' on page 15 ).
•
Software update: You can update the
software of the home theater through
the network (see 'Update software
from the network' on page 21 ).
What you need:
•
A network router (with DHCP
enabled).
•
A network cable (RJ45 straight cable).
•
For Net TV and software update,
make sure that the network router
has access to the Internet and is not
restricted by fi rewalls or other security
systems.
Note
• Net TV feature only available in Latin America.
10 EN
(Cable not supplied)
TV
Set up network
1
2
3
4
5
6
7
8
9
LAN
Connect the home theater to a broadband
modem or router (see 'Connect to the
Internet' on page 10 ).
Turn on your TV and switch to the correct
source for the home theater.
Press ( Home).
Select [Setup] , then press OK .
Select [Network] > [Network Installation] ,
then press OK .
Select [Wired (Ethernet)] , then press OK .
Select [Auto (recommended)] or [Manual
(advanced)] , then press OK .
Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry],
then press OK .
Select [Finish] , then press OK to exit.