Update Software From A Usb; Update Electronic User Manual - Philips 39PFL3108K/12 User Manual

Update software from a USB

1
Check for the latest software version on
www.philips.com/support.
•
Search for your model and click on
'software and drivers'.
2
Create a folder named 'UPG' in the root
directory of your USB storage device.
3
Download the software into the '\UPG'
folder of the USB storage device.
4
Unzip the software in the '\UPG' folder.
5
Connect the USB storage device to the
home theater.
6
Press ( Home ) and select [Setup] .
7
Select [Advanced] > [Software Update] >
[USB] .
8
Follow the instructions on the TV to
confi rm the update.
» When complete, the home theater
automatically switches off and restarts.
•
If not, disconnect the power cord for a
few seconds and then reconnect it.
Caution
•
Do not turn off the power or remove the USB
storage device when the software update is in
progress because you might damage the home
theater.

Update electronic user manual

1
Check the current version of the electronic
user manual installed in your home theater
(see 'Check software version' on page 21 ).
2
Insert a USB storage device into your PC.
3
In your web browser, navigate to www.
philips.com/support, and fi nd your product.
4
Click on 'Software and drivers' in the left
panel, and then locate the 'Electronic
Manual'. The electronic user manual is
compressed into a *.zip archive.
5
If the *.zip fi le at the Philips Support website
is a later version than the fi le in your home
theater, download the fi le in the root
directory of your USB storage device.
22 EN
6
Unzip the downloaded fi le in the root
directory of the USB storage device.
» A fi le named ' HTSxxxxeDFU.zip' i s
extracted in the '\UPG' folder of your
USB storage device, 'xxxx' being the
model number of your home theater.
7
Disconnect the USB storage device from
the PC, and connect it to the home theater.
8
Press ( Home).
• Ensure that there is no disc inside
the disc compartment of your home
theater and it is closed.
9
Press [3] , [3] , [8] on the remote control.
» Software update starts. When complete,
the home theater automatically switches
off and restarts.
10
When complete, disconnect the USB
storage device from the home theater.
Caution
•
Do not turn off the power or remove the USB
storage device during the update.
• If power failure occurs during the update,
do not remove the USB fl ash drive from the
home theater. The home theater continues the
update as soon as the power is restored.
•
If an error occurs during the update, retry
the procedure. If the error reoccurs, contact
Philips Consumer Care.