EN 10
4.
TPN16.1E LA
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
2016-Mar-11
Mechanical Instructions
4.3
4.3.1
1
3
Figure 4-2 Stand removal
back to
div. table
Assembly/Panel Removal (for 24"Pxx5211)
Instructions below apply to the 24PFK5211/12, but will be
similar for other 24"Pxx5211 series models.
Stand
Refer to
Figure 4-2
for details.
1. Remove the fixation area [2] that locked from the clips [1]
and the fixation area [4] that locked from the clips [3]. Refer
to
Figure 4-2
for details.
2. Take the stand bracket out from the set.
2
4
20100_101.eps