Asus B1MR E-Manual page 64

Select Display by Client mode.
2.
3. Press to scroll up or
Wi-Fi hotspots then press
would like to connect to.
4. Press to launch the onscreen display menu's keyboard.
Refer to the control panel grid when navigating the keyboard to
input the Wi-Fi hotspot's password then press Enter.
NOTE: The B1M/B1MR LED projector supports WPA/WPA2-enabled
devices.
Press OK to start the Wi-Fi connection between the Wi-Fi
5.
hotspot and your LED projector.
6. Repeat the same steps under Using Display by AP mode to
connect input devices to the LED projector.
64
to scroll down the list of available
to select the Wi-Fi hotspot you
LED projector E-Manual