Huawei Mate 10 Pro User Manual page 108

Type-C
To ensure full compatibility, visit Vmall and buy an adapter that is designed to work with
l
your device.
When your Phone is connected to an external display via an adapter, you can plug the
l
adapter into a charger to charge your phone. The charger must meet Huawei's 5 V/4.5 A,
5 V/2 A, or 9 V/2 A charging specification. Devices with a power output of less than 5 V/2
A should not be used.
If you connect the adapter to too many devices, it may not function properly.
l
You can also use Bluetooth to connect a mouse or keyboard to your phone directly.
l
If the desktop does not fit onto the external display, use the settings menu on the display
l
device to change the image adjustment mode to automatic. If necessary, refer to the user
manual for the display device.
After connecting your Phone to the external display, there are two projection modes:
Phone: The same content is displayed on your phone and on the external display.
l
Desktop: Different content is displayed on your phone and on the external display. For
l
example, you can view office apps on the external display and messaging apps on your phone.
Drag down from the status bar on your phone, or open the notification center on the external
display to switch between Phone and Desktop.
Use Your Phone as a Touchpad
If you've connected your phone to an external display, but you don't have a keyboard or mouse,
you can turn your phone into a virtual keyboard and pointing device in a few simple steps.
Swipe down from the status bar and touch Virtual keyboard and mouse in the shortcuts panel.
This feature can be used in the following ways:
Use touch gestures to simulate mouse commands.
l
DP MiniDP
Device Connection
HDMI
103