Table of Contents
Advertisement
The time code (TC) and the user bit (UB) information can be recorded as data attached to
movies.
1. MENU →
Menu item details
TC/UB Disp. Setting:
Sets the display for the counter, time code, and user bit.
TC Preset:
Sets the time code.
UB Preset:
Sets the user bit.
TC Format:
Sets the recording method for the time code.
TC Run:
Sets the count up format for the time code.
TC Make:
Sets the recording format for the time code on the recording medium.
UB Time Rec:
Sets whether or not to record the time as a user bit.
How to set the time code (TC Preset)
1. MENU →
of the control wheel.
2. Turn the control wheel and select the first two digits.
The time code can be set between the following range.
When [60i] is selected: 00:00:00:00 to 23:59:59:29
*
When [24p] is selected, you can select the last two digits of the time code in
multiples of four from 0 to 23 frames.
When [50i] is selected: 00:00:00:00 to 23:59:59:24
3. Set the other digits following the same procedure as in step 2, then press
center of the control wheel.
How to reset the time code
1. MENU →
of the control wheel.
2. Press the
(Delete) button to reset the time code (00:00:00:00).
(Setup) → [TC/UB Settings] → setting value you want to change.
(Setup) → [TC/UB Settings] → [TC Preset], then press
(Setup) → [TC/UB Settings] →[TC Preset], then press
in the center
in the
in the center
Advertisement
Table of Contents
