Section 4 - Configuration
Select Static IP if your ISP provides you with a specific IP address.
WAN Settings
Connection:
Select Static IP Address.
WAN Service Type:
Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are configuring your connection manually and your ISP
has not specified this setting, selecting INTERNET is recommended.
Connection Type:
Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC (IPoA),or
Routed IP VC-Mux (IPoA).
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask provided by your ISP.
Gateway Address:
Enter the default gateway address provided by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server
address is usually obtained automatically from your ISP.
Usage:
Select None or Default Route.
NAT Enable:
Enable or disable Network Address Translation.
Click Save when you are done.
D-Link DSL-3788 User Manual
Static IP
32