Table of Contents
Advertisement
Section 4 - Configuration
Select PPPoA if your ISP provides and requires you to enter a PPPoA username
and password in order to connect to the Internet. For ADSL connections only.
WAN Settings
Connection:
Select PPPoA.
WAN Service Type:
Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are configuring your connection manually and your ISP
has not specified this setting, selecting INTERNET is recommended.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Connection Type:
Select PPPoA LLC or PPPoA VC-Mux.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:
Select None or Default Route.
NAT Enable:
Enable or disable Network Address Translation.
Authentication
Select the authentication protocol your ISP uses. The options are
Protocol:
Auto, PAP, or CHAP.
Connect mode
Set the connection to be Always-on, Connect-On-Demand, or
Manual.
select:
D-Link DSL-3788 User Manual
PPPoA
35
Advertisement
Table of Contents
