Remote Control - Haier XShuai HXS-C3 Product Manual

5.2 Remote Control

1."POWER" button
Under the operating mode,the machine stops cleaning by pressing this button.
2."OK" button
A.Under the standby mode,the machine starts advanced zigzag cleaning by pressing this button.
B.Under the operating mode,the machine stops cleaning by pressing this button.
3.Direction buttons
A." "Up
Under the standby mode or operating mode,the machine moves forward by pressing this button.
B." "Down
Under the standby mode or operating mode,the machine moves backward by pressing this button.
C." "Left
Under the standby mode or operating mode,the machine rotates to the left by pressing this button.
D." "Right
Under the standby mode or operating mode,the machine rotates to the right by pressing this button.
4."HOME" button
Under the standby mode or operating mode,the machine retunes to charging dock for recharging
its battery by pressing this button.
5."AUTO" button
Under the standby mode or operating mode,the machine starts zigzag mode by pressing this button.
6."SOPT" button
Under the standby mode or operating mode,the machine starts cleaning mightily by pressing this
button.
7."ZIGZAG" button
Under the standby mode or operating mode,the machine starts zigzag mode by pressing this button.
8."EDGE" button
Under the standby mode or operating mode,the machine starts cleaning along the edge by
pressing this button.
9."VACUUM" button
Under the standby mode or operating mode,the machine starts strong suction power by pressing
this button.
!Note:
1.Please assemble two pieces of batteries before use.
2.If the remote control is not in use for a long time,please take out its batteries.
Product website: xshuairobot.com
1
4
2
6
8
HOME AUTO
OK
SPOT ZIGZAG
EDGE
VACUUM
- 12 -
5
3
7
9