Page 1
Conservez ce manuel pour pour toute référence ultérieure. MANUAL DE FUNCIONAMIENTO (simple) MANDO A DISTANCIA CON CABLE UTY-RNRYZ5 Conserve este manual para posibles consultas futuras. UTY-RNRGZ5 MANUALE DI ISTRUZIONI (semplice) UTY-RNRXZ5 UNITÀ DI CONTROLLO A FILO Conservare questo manuale per consultazione futura.
OPERATION MANUAL (Simple) ■ SAFETY PRECAUTIONS • The “SAFETY PRECAUTIONS” indicated in the manual PART No. 9373329701 WIRED REMOTE CONTROLLER contain important information pertaining to your safety. Be sure to observe them. [Original instructions] This mark indicates procedures Contents which, if improperly performed, WARNING might lead to the death or serious ■...
screen. Refer to [2 CONTROL] → [2-2 Operation Set- ■ Name of parts tings] → [2-2-1 Set the Operation Mode]. When the operation mode Set Temp. is set to [Custom Auto], the set temperature is displayed 28.0°C 28.0°C Cool for cooling and heating. 20.0°C 20.0°C Heat...
2 CONTROL 2-2-2 Set the Temperature (1) Touch the [Set Temp.] on the monitor mode screen. 2-1 On and Off (2) “Set Temp.” screen is displayed. Adjust the room tem- (1) Press the [On/Off] button. perature with the [ ] or [ ]. Set Temp.
3 SETTING (2) “Air Flow Direction Setting” Air Flow Direction Setting screen is displayed. When the [VT Setting] or [HZ Setting] is Setting Setting 3-1 Select the Setting Items touched, each setting screen is displayed. (1) Touch the [Menu] on the moni- Fri 10:00AM Back tor mode screen.
3-4 Timer Setting Note Up to 24 hours can be set. (1) Touch the [Timer Setting] on the “Main Menu” screen. (2) “Timer Setting” screen is displayed. Apply the setting. (6) Touch the [OK] on the “On On Timer Fri 10:00AM Timer Setting Timer”...
3-4-3 Auto Off Timer (10) “Start Time” screen is displayed. Set the Start Time by touching [ ] or [ ] on the “Start Time” screen. (1) Touch the [Auto Off Timer] on Timer Setting (10) the “Timer Setting” screen. On Timer [Disable] When the “Password Verifica- Time Range Setting...
• Economy: The temperature setting is offset automatically over a certain period of time. The power consumption is sup- pressed by setting the temperature high during cooling and low during heating. • Set Temp. Auto Return (for administrator) • Set Temp. Range Setting (for administrator) •...