2
Hardware Setup
Quick Setup
1.
After unpacking your HP Workstation, locate an accessible workspace to set up the system and
connect the mouse, keyboard, and power cables to your workstation. Connect the power cable
from the workstation to a power outlet.
NOTE
with the device. For more information on your HP Workstation, refer to the Documentation
and Diagnostics CD or visit http://www.hp.com/go/workstationsupport.
2.
Connect the monitor cables to the dongle and connect the dongle to the graphics card as shown
in the figure above. (If using only one monitor, or a graphics card with two outputs, a dongle may
not be required.) Connect the power cables from the monitors to a power outlet.
ENWW
Connect other components, such as a printer, according to the instructions included
Quick Setup
3