Haier HLC1700AXS User Manual page 19

IMPORTANT: Do not attempt to dry a full wash load.
A half load is the maximum for all dry cycles.
OPTIONS BUTTONS
The options buttons allow you to select additonal cycle options and will blink when
selected. Not all options are available with all cycles. Available options will grow
orange, current selections will blink.
You can decrease or increase the drying time for Timed Dry Only cycle by pressing
options buttons.
By pressing the "
By pressing the "
DELAY MODE
Press and hold "Soil Level" and "Dry Level" button at the same time in order to
get into "Delay" mode. The Delay icon will be turned on .The time can be
adjusted by pressing "
" " or " " button will cause the display to count continuously between 1
hour and 24 hours (by one hour increments) and the OFF position.
Another way to cancel the delay is to press and hold "Soil Level" and
"Dry Level" button at the same time.
After displaying "OFF", display will quickly go back to the normal wash time.
After selecting this option, you have to press the "Start/Pause" button to activate
a delayed start. Once started, only the selected cycle and settings will be displayed
in a steady state, the clock icon will blink, and the time display will count down in 1
minute increments.
NOTE: An activated delay start can be cancelled at any time by pressing POWER
ON/OFF button.
NOTE: Double check the Soil Level and Dry Level settings after activating
or canceling the Delay Mode. The cycle settings could have changed by not pressing
both buttons at the same time.
" button, you can select:
" button, you can select:
" and " " up to "24 hr". A press and hold of the
Half Load
17