1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CPX2(M1-20ML)
  6. Service manual

Hitachi CPX2(M1-20ML) Service Manual

Multimedia lcd projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be
sure to read cautionary items described in the manual to maintain safety before servicing.
1. When replace the lamp, to avoid burns to your fi ngers. The lamp becomes too hot.
2. Never touch the lamp bulb with a fi nger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing to the LCD PRISM assembly, do
not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specifi ed.
1. Features ------------------------------------------------------ 2
2. Specifi cations ----------------------------------------------- 2
3. Names of each part ---------------------------------------- 3
4. Adjustment --------------------------------------------------- 5
5. Troubleshooting -------------------------------------------11
6. Service points --------------------------------------------- 24
7. Wiring diagram -------------------------------------------- 42
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Multimedia LCD Projector
All manuals and user guides at all-guides.com
Caution
Service Warning
Contents
8. Disassembly diagram ----------------------------------- 49
9. Replacement parts list ---------------------------------- 62
10. Network communication -------------------------------- 63
11. Block diagram --------------------------------------------- 74
12. Connector connection diagram ----------------------- 75
13.Basic circuit diagram ------------------------------------ 76
January 2007
No.0582E
YK
CPX2(M1-20WL)

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CPX2(M1-20ML)

Summary of Contents for Hitachi CPX2(M1-20ML)

  • Page 1: Table Of Contents

    Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing.

  • Page 2: Features

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 1. Features • High Brightness • Cable-Free Presentations • Low Noise • Remote Control Via Your Web Browser • Rich Connectivity • Stand Alone Presentations • Compact Body • Multiple Screens 2. Specifications Drive system TFT active matrix Liquid crystal...

  • Page 3: Names Of Each Part

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 3. Names of each part Projector HOT! (1) (2) (3) (1) Lamp cover The lamp unit is inside. (2) Focus ring (10) (3) Zoom ring (9) (8) (11) (4) Control panel (Bottom) (5) SD card slot cover (6) Elevator knobs (x 2) (7) Elevator feet (x 2)
  • Page 4 All manuals and user guides at all-guides.com CPX2(M1-20WL) Control panel (1) STANDBY/ON button (4) (5) (6) (2) INPUT/ENTER button (3) MENU button LAMP INPUT/ STANDBY/ON ENTER It consists of four cursor buttons. MENU TEMP (4) POWER indicator POWER (5) TEMP indicator (6) LAMP indicator Remote control (1) VIDEO button...

  • Page 5: Adjustment

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Adjustment Replaced White...
  • Page 6 All manuals and user guides at all-guides.com CPX2(M1-20WL) 4-2 Flicker adjustment (V.COM adjustment) Test pattern for the adjustment Adjustment procedure 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery.
  • Page 7 All manuals and user guides at all-guides.com CPX2(M1-20WL) 4-5 White balance adjustment (visual inspection) Preparations 2. Reset gamma correction before adjustment. 1. Perform these adjustments after the adjust- ments described in Section 4-5. Place the cursor on [GAMMA] in the FACTORY MENU, press the [RESET] key and select RESET.
  • Page 8 All manuals and user guides at all-guides.com CPX2(M1-20WL) 4-6 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments 5. Adjustment point No.1 should not be adjusted, described in the section 4-6. because it controls the brightness of the entire 2.
  • Page 9 All manuals and user guides at all-guides.com CPX2(M1-20WL) Adjustment procedure 1 (When a color differential meter is used) Note: Since excessive correction may lead to a 1. First adjust the [MID-1] tone [G:]. correction data overview during internal 2. Select adjustment point [No.2][G:]. calculations, use the following values for When the background is not [G] monochrome, reference.
  • Page 10 All manuals and user guides at all-guides.com CPX2(M1-20WL) Adjustment procedure 2 (visual inspection) same color as measurement point [No.1]. 1. First adjust [MIN] tone [G:]. Adjustment technique: 2. Select [No.2] [G:]. First, adjust [B:] of the point whose color is to If the background is [G] monochrome, press the be adjusted so that it approximates that of [ENTER] key on the remote control to switch to...

  • Page 11: Troubleshooting

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 5. Troubleshooting Check points...
  • Page 12 All manuals and user guides at all-guides.com CPX2(M1-20WL) Power can not be turned on *: Be sure to unplug the power cord before measuring resistance. voltage Measure supplied at pins (7) resistance* 0Ω and (11) of E800 on the PWB between pins (7) and (11) of PWB assembly MAIN assembly MAIN in standby...
  • Page 13 All manuals and user guides at all-guides.com CPX2(M1-20WL) Lamp does not light *: Be sure to unplug the power cord before measuring resistance. What is the state of Light LAMP indicator D303 during operation? Is the LAMP installation install the Lamp correct? Not light the voltage...
  • Page 14 All manuals and user guides at all-guides.com CPX2(M1-20WL) Picture is not displayed. Confirm the splash the LCD Panels screen and the user menu CPC40 connector 54104/54132 connection to the MAIN displayed correctly? board. PWB assembly MAIN LCD/Lens prism assembly PWB assembly MAIN No sound Check at operating mode (Make sure the state of MUTE and Volume)
  • Page 15 All manuals and user guides at all-guides.com CPX2(M1-20WL) Image of the WIRELESS NETWORK UNIT is not displayed on the screen. Is the MIU port selected ? Change the port to MIU Wired ? Does the WIRELESS SD card mount on projector correctly? Is cable Connect cable...
  • Page 16 All manuals and user guides at all-guides.com CPX2(M1-20WL) The WIRELESS NETWORK can not be communicated to PC when the WIRELESS NETWORK is in a factory default settings. Did you check above P.12 and P.15 ? Check above P.12 and P.15 Once unplug the power cord, and wait until LED changes When you check...
  • Page 17 All manuals and user guides at all-guides.com CPX2(M1-20WL) Is PC LAN settings same as Change PC LAN settings. following ? CH:1, SSID:default, ENCRYPTION:off, MODE: ADHOC, SPEED:AUTO NOTE: Method of changing the PC LAN setting depends on your PC. Please read your PC manual. Is wired LAN at PC’s Disable wired LAN, and confirm...
  • Page 18 All manuals and user guides at all-guides.com CPX2(M1-20WL) Time in not correctly displayed. DATE AND TIME is displayed as 2000/1/1 0:00 in INFORMATION on NETWORK menu. Is TIME Set the time in DIFFERENCE on Set the time. Was the time set before? DATE AND TIME on INFORMATION correct ? NETWORK menu.
  • Page 19 All manuals and user guides at all-guides.com CPX2(M1-20WL) Select “INFORMATION” Fig.1 Confirm Configuration Reset Key Fig.2 Reset Wireless Network Unit settings...
  • Page 20 All manuals and user guides at all-guides.com CPX2(M1-20WL) Fig.3-1 Select Network Menu 1. Double Click Wireless Icon 2. Click "Properties" Fig.3-2 Select Properties...
  • Page 21 All manuals and user guides at all-guides.com CPX2(M1-20WL) Select "Internet Protocol (TCP/IP)" 2. Click "Properties" Fig.3-3 Select TCP/IP Fig.3-4 Input IP address and Subnet mask...
  • Page 22 All manuals and user guides at all-guides.com CPX2(M1-20WL) Fig.4-1 Select Network Menu Right click on Networks except Right click "wired" network, "Wireless" and select "Disable" and disable it. on then. CAUTION: The networks setting picture is different from this due to OS version on PC. Fig.4-2 Disable Wired Network...
  • Page 23 All manuals and user guides at all-guides.com CPX2(M1-20WL) Fig.5 Wireless Network Configuration Fig.6 Execute ipconfig...

  • Page 24: Service Points

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
  • Page 25 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-2 Replacing The LCD/PRISM assembly You should not replace separately the parts of the LCD/PRISM assembly. In case of a failure in any parts of LCD/PRISM assembly, replace the whole LCD/PRISM assembly. Do not disassemble the unit because replacement of separate parts is not possible.
  • Page 26 All manuals and user guides at all-guides.com CPX2(M1-20WL) 3. Maintenance point Optical filter Each color part has same construction. By using swab and air duster, you can easily remove dust from panel and optical filter. Panel Actual formation Separated formation 4.
  • Page 27 Battery Case 5. Replace a new battery. Battery Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present a risk of fi re or explosion. Battery Put a new battery into battery case. Please make sure that the + is facing Case upward.
  • Page 28 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-4-2 Potting batteries into the remote control 1. Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.
  • Page 29 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-5 Cleaning up dust from multilens 1. Preparation Please prepare cleaning tools and materials as follows. (1) Air duster (Dust blower, spray can) (2) Swab for cleaning "Cotton stick L147" (3) Vacuum cleaner 2.
  • Page 30 All manuals and user guides at all-guides.com CPX2(M1-20WL) 5. Cleaning the multilens (1) By using the air duster, remove the dust on multilens. (2) Remove the dust on the ML-A surface using the air duster, then wipe the surface. Remove LAMP CLAP first. Remove DUST PROOF GLASS next.
  • Page 31 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-6 Air filter If the air fi lter becomes clogged by dust or the like, internal temperatures rise and could cause a fi re, a burn and/or malfunction to the projector. When the indicators or a message prompts to clean the air fi lter, clean the air fi...
  • Page 32 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-7 Lamp HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
  • Page 33 All manuals and user guides at all-guides.com CPX2(M1-20WL) Replacing the Lamp A lamp has fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
  • Page 34 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-8 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector.
  • Page 35 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-9 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on.
  • Page 36 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-10 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and pre- vent the currently registered MyScreen image from being overwritten.
  • Page 37 PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed.
  • Page 38 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-12 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.
  • Page 39 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-13 Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the mean- ings as described in the table below. Please respond in accordance with the instructions within the table. POWER LAMP TEMP...
  • Page 40 PJLink Select the PJLink. TURN OFF ↔ TURN ON STARTUP TYPE Select the startup screen type. 1 : shows Hitachi Logo 2 : No Hitachi Logo SOFT RESET If this is executed, all of the user data is initialized.Never use it when not required.
  • Page 41 All manuals and user guides at all-guides.com CPX2(M1-20WL) 6-16 Reset of the Network Web password / User ID, Network Control password ATTENTION : Performing this operation initializes the network settings. If the projector has the customized settings in the network, make a note of the network settings to restore them before this operation.

  • Page 42: Wiring Diagram

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 7. Wiring diagram...
  • Page 43 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 44 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 45 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 46 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 47 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 48 All manuals and user guides at all-guides.com CPX2(M1-20WL)

  • Page 49: Disassembly Diagram

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 8. Disassembly diagram (See Notice 1)
  • Page 50 All manuals and user guides at all-guides.com CPX2(M1-20WL)
  • Page 51 All manuals and user guides at all-guides.com CPX2(M1-20WL) Notice 1. The step of the disassembly / The step of the assembly. Disassemble the projector in order of 1, 2, 3, 4, 5, 6 and 7 as shown in the diagram. Assemble the projector in order of 7, 6, 5, 4, 3, 2, and 1 as shown in the diagram.
  • Page 52 All manuals and user guides at all-guides.com CPX2(M1-20WL) Notice 2. Detach and attach the upper case. Follow the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged.
  • Page 53 All manuals and user guides at all-guides.com CPX2(M1-20WL) c. Detach the upper case CAUTION When detaching the upper case. Detach the circle point side fi rst. Otherwise, upper case will be damaged. Make sure not to damage the upper case ribs (square pointed). Make sure not to touch reverse side of main board.
  • Page 54 All manuals and user guides at all-guides.com CPX2(M1-20WL) When assembling a. Tighten 7 screws on the bottom and 3 screws on the rear after attaching the upper case with the lamp door separated. In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow.
  • Page 55 All manuals and user guides at all-guides.com CPX2(M1-20WL) 3. Replacing the power units. You have to remove the Optics unit, Lamp duct and Lamp house in order of before dettach the power unit. Remove the 3 screws to take off the power units. NOTE : Detaching power unit(circuit) Reuse the Hex-head screw.
  • Page 56 All manuals and user guides at all-guides.com CPX2(M1-20WL) 4. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 1 screw and unhook the panel fan duct assembly as shown in the diagram. Lamp fan Lamp fan wire Tape Thermister Panel fan duct assembly Push each of hooks in the direction of the arrows, while...
  • Page 57 All manuals and user guides at all-guides.com CPX2(M1-20WL) 5. Attaching / Detaching the optics unit (1) Remove the three screws as shown in the diagram. And detach the optics unit vertically. (2) Put the optics unit on the bottom case, and tighten screws in order of 1, 2 and 3 as shown in the diagram.
  • Page 58 All manuals and user guides at all-guides.com CPX2(M1-20WL) 8. Attaching the PWB assembly MAIN Note: Use the suitable screw for each screw holes when attaching the main board. Black screw (Tapping screw) White screw (Meter screw) 9. Replacing the air filter. Note: (1) Make sure to fit the concave part of the air filter to the convex part of the filter case.
  • Page 59 All manuals and user guides at all-guides.com CPX2(M1-20WL) 10. Replacing the lamp unit CAUTION When replacing the lamp unit, never detach the three springs. Otherwise, it will be impossible to reuse the lamp unit. Lamp unit Lens fixation springs (3 pieces) Note: When detaching the lamp unit, detach the connector side first.
  • Page 60 All manuals and user guides at all-guides.com CPX2(M1-20WL) 11. Replacing the exhaust fan Be sure to do the following works before changing the exhaust fan. a. Prepare the following replacement parts. Exhaust fan(P#: GS01411) ....1pcs Fan cushions(P#: MS01612) .....1set Fan cushion A ......2pcs Fan cushion B ......1pcs Fan cushion C ......1pcs Fan cushion D ......1pcs...
  • Page 61 All manuals and user guides at all-guides.com CPX2(M1-20WL) 12. Replacing the control button Be sure to do following works before changing the control button. a. Make sure the contents of new control button assembly (P#: PC07081) Control button ........1pcs Cushion A ..........1pcs Cushion B ..........3pcs b.

  • Page 62: Replacement Parts List

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 9. Replacement Parts list PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components, read carefully, the PRODUCT SAFETY NOTICE of this Service Manual. Don't degrade the safety of the projector through improper servicing.

  • Page 63: Network Communication

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 10. Network communication Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open...
  • Page 64 All manuals and user guides at all-guides.com CPX2(M1-20WL) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC flag for command data CRC_high: Upper byte of CRC flag for command data 3.
  • Page 65 All manuals and user guides at all-guides.com CPX2(M1-20WL) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code.
  • Page 66 All manuals and user guides at all-guides.com CPX2(M1-20WL) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’...
  • Page 67 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 68 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 step gray scale BE EF 06 00 6B FB...
  • Page 69 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00...
  • Page 70 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00 09 22...
  • Page 71 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK TURN OFF BE EF 06 00 CB D6 01 00 14 30 00 00 TURN ON BE EF 06 00 5B D7...
  • Page 72 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30...
  • Page 73 All manuals and user guides at all-guides.com CPX2(M1-20WL) Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO OFF BE EF 06 00 08 86 02 00 10 31 00 00 Increment BE EF 06 00 6E 86 04 00 10 31...

  • Page 74: Block Diagram

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 11. Block diagram...

  • Page 75: Connector Connection Diagram

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 12. Connector connection diagram SD CARD PWB assembly MAIN EASP SPEAKER OUT- OUT+ Molex_54104 P501 E801 Molex_54132 P601 FAN1S USB-A Molex_54104 P701 (EXHAUST) V.COM PSIG VSSG USB-B EK01 VID1 VID2 E802 VID3 FAN2S ESET SW S309...

  • Page 76: Basic Circuit Diagram

    All manuals and user guides at all-guides.com CPX2(M1-20WL) 13. Basic circuit diagram Parts with hatching are not mounted. CONFIDENTIAL DOWN 56.9KHz I002 I001 KSM-2003LM2EL KSM-2003LM2EL Vout Vout C012 C002 100p-C 100p-C 1005 1005 C011 C001 1.0/10 1.0/10 R003 1005 APRC01 APRC02 APRC03 APRC04...
  • Page 77 All manuals and user guides at all-guides.com CONFIDENTIAL Warning POWER UNIT (BALLAST) 1 (M1-20WL) For handling of the circuit diagram, refer to the warning on the cover.
  • Page 78 All manuals and user guides at all-guides.com CONFIDENTIAL Warning POWER UNIT (BALLAST) 2 (M1-20WL) For handling of the circuit diagram, refer to the warning on the cover.
  • Page 79 All manuals and user guides at all-guides.com CONFIDENTIAL Warning POWER UNIT (CIRCUIT) (M1-20WL) For handling of the circuit diagram, refer to the warning on the cover.
  • Page 80 All manuals and user guides at all-guides.com +3.3VPW I201 I201 I201 PW190 PERIPHERALS PW190 DIGITAL INPUT PORT DISPLAY PORT PW190 R2C4 CH0CK IN0CLK IN0CLP CH0CP NC-D13 3.3V 3.3V GCLK R2C5 DCLKOUT DCLK CH0PE IN0PEN IN0CST CH0CS NC-E18 3.3V 3.3V 1005 R2C6 R2K0 CH0VB...
  • Page 81 All manuals and user guides at all-guides.com L251 600μH I201 1608 RESETN 3.3V PW190 R200 2.5V 65mA 3.3V 1005 R203 3.3V AC15 AC15 1.0K R217 3.3V AE16 AE16 1005 Q201 3.3V AF16 AF16 C273 JUMPER R DTC114EUA 凸2010 AC16 3.3V AC16 N251 R201...
  • Page 82 All manuals and user guides at all-guides.com +3.3V LED-P-G LED-P-R LED-TEMP R376 CPU-RESET LED-LAMP 3.2V 3.2V S309 1005 I301 SKHHLMA010 R371 R379 RN5VD26C 2.8V RESETN 1005 Q372 1005 SRC1202EF TEMP D302 C390 0.1/10 SML-210VT 1005 LAMP D303 SML-210VT GND1 D301 GREEN SML-020MVT86 1.4V...
  • Page 83 All manuals and user guides at all-guides.com 3.2V 240mA 495mA R836 R835 3.3V 1005 3.3V 1005 MOUSE confidential Q809 2SC5343UFG PWRC I801 SI-3010KM 15.5V-Panel L817 4.7μH C6-K3LA L816 I892 I808 C823 4.7μH SN74LVC1G32DCK ->TC7SZ32FTE85L 0.033/16 MM1661JHBE C6-K3LA 1.8V-CPU 6.6V C824 +1.8VCPU I802 I803...
  • Page 84 All manuals and user guides at all-guides.com TG part for BiNA5 I401 CXD3540GB from I808 CXD3540GB 3/3 L401 I401 controlled by POWER5 2.2μH CXD3540GB I401 2518 275mA@1.8V CXD3540GB CXD3540GB 1/3 +1.8VP VDDI-D4 VSS-A1 VDDI-D7 VSS-A2 CXD3540GB 2/3 R401 R431 HST_R VDDI-D8 VSS-A7 C401...
  • Page 85 All manuals and user guides at all-guides.com R Panel Part from I802 from I801 for BiNA5 XGA controlled by POWER6 controlled by POWER7 70mA 80mA JUMPER R R534 I502 TC7SG125FU 1005 R544 Q533 C521 SHCLK_R IN_A 2SC5343UFG R543 R531 1005 10/16 OUT_Y MVK/SKV...
  • Page 86 All manuals and user guides at all-guides.com G Panel Part from I802 from I801 for BiNA5 XGA controlled by POWER6 controlled by POWER7 70mA 80mA JUMPER R R634 I602 TC7SG125FU 1005 R644 Q633 C621 SHCLK_G IN_A 2SC5343UFG R643 R631 1005 10/16 OUT_Y MVK/SKV...
  • Page 87 All manuals and user guides at all-guides.com from I801 B Panel Part from I802 controlled by POWER7 controlled by POWER6 for BiNA5 XGA 70mA 80mA JUMPER R R734 I702 TC7SG125FU 1005 R744 C721 Q733 SHCLK_B IN_A 2SC5343UFG 1005 R743 R731 10/16 OUT_Y MVK/SKV...
  • Page 88 All manuals and user guides at all-guides.com LV01 100μH 5.0V 2518 JUMPER R GND1 RV48 RV49 DSUB1_B RV50 1005 DSUB1_G 1005 DSUB1_R DSUB1_H 1005 DSUB1_V 1005 75-1% RV54 QV09 RV46 RV47 2SC5343UFG GND1 1005 1005 CV33 RV42 RV61 QV04 10/6.3 2SA1980UFG 2125 1005...
  • Page 89 All manuals and user guides at all-guides.com LS01 10μH 2518 RS05 3.3V RS06 1005 5.0V RS04 1005 GND1 1005 RS90 0.0V APDG RS91 1005 0.0V 0.0V QS02 SRC1202EF 1005 RS92 0.0V ES01 1005 3114-15FA CS03 10/6.3 CS09 APCL 2125 3.3V IS02 EL8302IUZ-T7 RS34...
  • Page 90 All manuals and user guides at all-guides.com RA40 POWER5 100 1 RA42 1005 POWER5 100 1 confidential 1005 IA03 MM1665AHBE CA36 Cont 470p 1005 NC-6 RA41 NC-7 NC-2 Vout 1005 IA01 +6.6V CA54 BD3870FS 0.33/10 VIN1 MPEG Audio R - in AOUTR CA55 0.0022 VIN2...
  • Page 91 All manuals and user guides at all-guides.com APRXJ EK51 APTXJ SH-04H RXD_CT TXD_CT DK21 AP5VJ SDS511 RK35 QKA2 IK01 SRC1202EF DS14C232CM 1005 RKA8 RKA9 0.0V RKA6 1005 IKA1 1005 GND1 3.3V SN74LVC1G125DCK Dout1 1005 QKA3 SRC1202EF Rin1 XK25 IK21 RKA7 6.00MHｚ...
  • Page 92 All manuals and user guides at all-guides.com DCLKFB DCLKM DCKE xDWE VDVSYNC xDCAS VDHSYNC xDRAS VDCLKOUT VDPCLKIN DDQM3 DDQM3 VDENABLE DDQM2 DDQM2 DDQM1 DDQ31 DDQM1 DDQ31 DDQM0 DDQ30 DDQM0 3.3VM DDQ30 DDQ29 DDQ29 DBA1 DDQ28 DBA1 DDQ28 DBA0 DDQ27 DBA0 DDQ27 DDQ26 DDQ26...
  • Page 93 All manuals and user guides at all-guides.com GND1 120μH 120μH 3.3VM 1005 AA1 VDE-AA1 N.C.-A1 0.1/10 1608 VDE-AB2 N.C.-B1 VDE-Y25 N.C.-C1 1.0/10 F3 VDE-F3 N.C.-D1 1005 CM21 VDE-C18 N.C.-AC1 0.1/10 3.3VM VDE-C6 N.C.-AD1 VDE-D4 N.C.-AE1 1.0/10 J4 VDE-J4 N.C.-AF1 1005 L4 VDE-L4 CM22 N.C.-AF2...
  • Page 94 All manuals and user guides at all-guides.com DDQ31 DDQ31 DDQ30 DDQ30 RM75 DDQ29 DDQ29 DDQ28 DDA12 DDAA12 DDA12 DDQ28 1005 DDQ27 DDA11 DDAA11 DDA11 Vcc-1 Vss-54 DDQ27 DDQ26 DDA10 RM76 DDAA10 DDA10 DDQ26 DDQ16 DDQ31 DDQ25 DDA9 DDAA9 DDA9 DQ15 DDQ25 DDQ17 DDQ30...
  • Page 95 All manuals and user guides at all-guides.com 3.3VM 3.3VM 27.000MHz SMD-49 TMP4 RM147 xINTB RM158 1005 RM140 USCKI R2051S02-E2 1005 CM188 1005 1.0M SDCKI NC-1 RM162 9.0p-C 1005 X1/ICLK 1005 TP001 PDTS CLKOUT NC-14 RM137 CLK2 SCL0 OSCIN RM148 RM138 1005 SDA0 OSCOUT...
  • Page 96 All manuals and user guides at all-guides.com 3.3VM SCL1 SDA1 LRCKI BCKI xIRQ7 xIRQ7 xIRQ6 xIRQ6 xIRQ5 xIRQ5 xIRQ4 xIRQ4 A31F A31F A30F A30F A29F A29F A28F A28F A27F A27F A26F A26F A25F A25F A24F A24F xBSTACK xBSTREQ xBREQ xERR xRAMBOOT VCVSYNC VCVSYNC...
  • Page 97 All manuals and user guides at all-guides.com 3.3VM SSM6J25FE QMR4 RM222 1005 QMR1 MCH3309-TL xSDIOPWRON QMR2 SRC1202EF TMP6 RM225 RM223 RM419 1.5K 1005 1005 1005 QMR3 SRC1202EF GND1 SDAT3 SDAT3 SDAT2 SDAT2 GND1 SDAT1 IM11 SDAT1 LM11 SDAT0 RM226 R5520H001B-T1 SDAT0 47μH 47μH...
  • Page 98 All manuals and user guides at all-guides.com LM14 4.7μH C6-K3LA CM131 RM241 LM13 0.033/16 4.7μH 3.3VM C6-K3LA 2125 1005 IM15 TPS40222DR CM122 CM123 CM124 0.1/10 +6.6V PVIN RM243 1005 10/6.3 220/6.3 TMPP43 2125 MVK/SKV AVIN 1005 CM127 CM129 3.3V-MIU BOOST 0.8V 10/10 0.1/10...
  • Page 99 All manuals and user guides at all-guides.com 3.3VM RM403 CLK20MO 1005 D31F D31F D30F D30F D29F D29F D28F D28F D27F D27F D26F D26F D25F D25F D24F D24F D23F D23F D22F D22F D21F D21F D20F D20F D19F D19F D18F D18F D17F D17F D16F D16F...
  • Page 100 All manuals and user guides at all-guides.com MEMO...
  • Page 101 All manuals and user guides at all-guides.com CPX2(M1-20WL) Basic circuit diagram list PWB assembly REMOTE PWB assembly MAIN 9 POWER UNIT BALLAST 1 PWB assembly MAIN 10 POWER UNIT BALLAST 2 PWB assembly MAIN 11 POWER UNIT CIRCUIT PWB assembly MAIN 12 PWB assembly MAIN 1 PWB assembly MAIN 13 PWB assembly MAIN 2...
  • Page 102 All manuals and user guides at all-guides.com CPX2(M1-20WL) YK No.0582E QR71001 Printed in Japan (JE)

Table of Contents