Hitachi TB-1R User Manual page 14

Mounting the Wireless Adapter and USB Memory Devices
Connect the tablet's wireless adapter to a USB TYPE A port on your projector.
When you wish to save an image that has been drawn, a USB memory device must also
be connected to a USB TYPE A port of the projector.
If the projector only has one USB TYPE A port, use a USB hub to connect both devices.
NOTE
• Some USB memory devices and/or USB hubs may not operate properly.
Connecting the Computer and Projector with a USB Cable
In order to use the tablet in place of the computer's mouse, connect a USB TYPE B port of
the projector with a USB port (Type A) of the computer with a USB cable.
Then select "MOUSE" for the projector's "USB TYPE B" function setting.
NOTE
• For information on the projector's "USB TYPE B" settings, refer to the user's manual
of the projector.
Tablet
01TB-1̲Eng.indd 14 01TB-1̲Eng.indd 14
Preparations for Use
Wireless USB memory
adapter device
Projector
USB TYPE A
Fig. 4 Example of connections
14
USB hub
Computer
USB TYPE B
2011/11/11 14:57:53 2011/11/11 14:57:53