Hitachi TB-1R User Manual page 20

6. Projector
Operation
01TB-1̲Eng.indd 20 01TB-1̲Eng.indd 20
Using the Tablet
Operates the projector.
Calls up and display the previous ¿ le in the USB memory
device from that currently selected. This function is available
when the projector is displaying a ¿ le from a USB memory
device.
Calls up and display the next ¿ le in the USB memory device
from that currently displayed. This function is available when
the projector is displaying a ¿ le from a USB memory device.
Displays thumbnails of ¿ les recorded on a USB memory
device.
You can display an image onto the projector screen by
touching its thumbnail.
Saves the image on the projector screen, along with any text
or pictures drawn, onto a USB memory device connected to
the projector.
• Files are saved with the ¿ le name "Pxxx.bmp" (where xxx is
a consecutive number) into a folder named "PJ_Capture".
If it does not already exist, a "PJ_Capture" folder is created
automatically.
• Before removing a USB memory device with ¿ les saved to it
from the projector, be sure to run the projector's "REMOVE
USB" function. The time stamp of saved ¿ les are as per the
date and time settings of the projector. If you do not run the
"REMOVE USB" function and remove the USB memory
device, the time stamp may not be recorded correctly.
• The tool bar is not saved.
• Copyright protected images cannot be saved.
• Nothing drawn using this function is saved to the projector's
"MyScreen".
Temporarily blanks out the display.
Touching anywhere in the tablet's operation area recovers the
display.
• It can be used in the same way as the
projector's remote control.
20
BLANK button on the
2011/11/11 14:57:54 2011/11/11 14:57:54