Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........23 AND ENVIRONMENT Upper basket rack ......24 General safety ........4 Ceiling cutlery basket ......24 Intended use ..........4 Children’s safety ........5 5 OPERATING THE PRODUCT 25 Disposing of packaging material ..5 Keys ............
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety to be used in household and similar applications such as: Electrical products are • - Staff kitchen areas in shops, dangerous for the children. offices and other working Keep children away from the environments;...
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured from water supply connections. recyclable materials in accordance with our National Environment 3. Drain the remaining water in Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be installed...
Installation Permitted water temperature: be min. 50 cm and max. 100 cm from the up to 25°C ( 60°C for products floor. A discharge hose longer than 4 meters equipped with Aquasafe+; please causes dirty washing. refer toAquasafe+ section ) Attach the water discharge hose to the The dishwasher may not be connected to drainpipe without bending it.
Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Washing, rinsing and drying performance manner. of your dishwasher will improve when the Wipe away any coarse food remnants on the water softening system is adjusted correctly.
Page 15
Preparation Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
Preparation If the hardness level of the water that Salt reservoir will be filled with you use is above 50°dH or if you are using water when you start the well water, than it is recommended to use product. For this reason, add salt filter and water purification devices.If the before operating the machine.
Preparation Put the detergent into the detergent You need to add salt right before dispenser just before operating the machine starting the machine. Thus, the as illustrated below. overflowing salty water will be Push the latch to right to open the flushed immediately, preventing detergent dispenser lid (A).
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water 3.
Preparation When you switch to powder 2. Fill the reservoir until “MAX” level. detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3.
Preparation Items not suitable for Place the hollowed dishes such as • bowls, glasses and pans upside down in washing in the dishwasher the dishwasher. Thus, accumulation of Never wash dishes soiled by cigarette • water in deep hollows is prevented. ash, candle remnants, polish, dyestuff, To prevent possible injuries, chemicals, etc.
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User’s Manual 19 / 41 EN...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower basket efficient manner. of the machine are designed for an easier Since the cutlery basket can be moved (A, placement of large pieces such as pans, B), you can create more space while placing...
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Collapsible upper basket Upper basket multipurpose wires service rack (depends on model) (depends on model) You can use collapsible wires when you need This accessory located at the upper basket a larger space for your dishes in the upper of your machine allows you to easily wash basket of your machine.
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Upper basket rack (depends on model) Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. /41 EN Dishwasher / User’s Manual...
Operating the product Display 5. Function keys 2. On/Off key Half Load function Fast+ Function 3. Start/Pause/Cancel key 4. Time Delay key SteamGloss Function AquaIntense Function 6. Programme Selection keys 15 16 7. Programme indicator 12. End of Programme indicator 8.
Operating the product Keys Programme selection On / Off key Press the On/Off button to turn on your It is used to turn on or off the machine. machine. Press On / Off Key to switch ON. 2. Refer to the table of "Programme data Machine will turn on with economy and average consumption values"...
Operating the product Auxiliary functions AquaIntense Function AquaIntense impeller Washing programmes of your dishwasher located under the are designed to obtain the best cleaning lower impeller helps effect, considering the type of the soil, washing your heavily soiling degree and properties of the dishes soiled dishes places in to be washed.
Operating the product 2. Press P / P+ key to move to the L: 2. Press P+ key to activate the a: option. position on the display. Interior lighting Automatic detergent detection feature is off in “L:0” position and on in “L:1” is disabled at “a:0”...
Page 32
Operating the product Changing the settings while Time Your machine performs water Delay function is enabled softening depending on the While the Time Delay function is activated, hardness level of the supply you cannot make changes in the washing water. Remaining time displayed programme, auxiliary functions or the towards the end in some duration of delay time.
Operating the product Child (Key) Lock necessary operations required to cancel the programme. You may prevent other people from interrupting and changing the programme There might be residues of cycle and time delay while the machine is detergent or rinse aid left in the running.
Operating the product Adjusting the amount of Leave your dishes in the machine rinse aid for about 15 minutes to cool down after they are washed. After turning on the machine, press Your dishes will dry in a shorter Time Delay and P+ keys simultaneously. time if you leave the door of your Keep them pressed until the countdown machine ajar during this period.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 39
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 40
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 41
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 42
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.