Adjusting The Vehicle Position - JVC KW-NT500HDT Instructions Manual

Adjusting the vehicle position

If you find your current position is displayed on a wrong
place on the map, use this setting to correct your
position.
1
2
EN_KW-NT500HDT_NT300[J].indb 35 EN_KW-NT500HDT_NT300[J].indb 35
3
Move the cursor to the position where you
want to set as current position.
To adjust the direction of the vehicle, press
[Direction].
• If you do not want to adjust the direction, press
[OK].
4
Adjust the direction.
35
Arranging your route
12/7/2011 1:06:09 PM 12/7/2011 1:06:09 PM